ASROCK M810LMR Uživatelský manuál stáhnout pdf

Nicktoons RACING BIOS settings

The following sections were cut from our Programmers Manual…

To get into the BIOS on the ASRock M810LMR Motherboard, press F2 during the power on self test.

(turn on the game, wait about 1 second, then tap F2 once a second until the BIOS screen is visible on the

monitor).

1.1.1. ASRock M810LMR Motherboard and AMIBIOS settings

The menus are selected by the left & right arrow keys, to select item in any menu use the up & down

keys. The bottom 2 lines on the BIOS screen describe the operation of the other keys.

Sometimes it is easier to use the “Load default settings”, then change the BIOS settings (See X) .

To get into this BIOS, use the “F2

” key.

The Column X indicates a change from “Load default settings”

Here are the recommended BIOS settings

Table 1, AMI BIOS for ASRock M810LMR Mother board

AMIBIOS, VERSION 3.31a

Value X

Main (menu)

System Date

(Current Date)

System Time

(Current time)

Floppy Drives

Floppy Drive A

Not Installed X

Floppy Drive B

Not Installed

Floppy Drive Swap

Disabled

Floppy Drive Seek

Disabled

IDE Drives

Primary IDE Master

(C: hard drive)

Type

Auto

32 Bit Transfer Mode

Off X

Ultra DMA mode

Disabled X

Primary IDE Slave

(Not installed)

Type

Auto

32 Bit Transfer Mode

Off X

Ultra DMA mode

Disabled X

Secondary IDE Master

(the CD Drive)

Type

Auto

32 Bit Transfer Mode

Off X

Ultra DMA mode

Disabled X

Secondary IDE Slave

(Not installed)

Type

Auto

32 Bit Transfer Mode

Off X

Ultra DMA mode

Disabled X

PCI IDE BusMaster

Disabled

S.M.A.R.T. for hard disks

Disabled

Advanced (menu)

Spread Spectrun

Disabled

1 2 3 4 5 6 ... 11 12

Shrnutí obsahu

Strany 1

Nicktoons RACING BIOS settings The following sections were cut from our Programmers Manual… To get into the BIOS on the ASRock M810LMR Motherbo

Strany 2

CPU Internal Cache [Enabled] External Cache [Enabled] CPU L2 Cache ECC Checking [Enabled] Video BIOS Shadow [Enabled] Virus Warning [Disabl

Strany 3

IDE Prefetch Mode [Enabled] Primary Master PIO [Auto] Primary Slave PIO [Auto] Secondary Master PIO [Auto] Secondary Slave PIO [Auto] Primary Mas

Strany 4

Primary INTR [Enabled] IRQ3 (COM 2) [Enabled] IRQ4 (COM 1) [Enabled] IRQ5 (LPT 2) [Enabled] IRQ6 (Floppy Disk) [Enabled] IRQ7 (LPT 1) [Enabled]

Strany 5

CPU Host Frequency By Jumper SDRAM Frequency Auto Chipset Configuration PCI Delay Transaction Disabled OnChip VGA Frame Buffer SizeAuto USB Con

Strany 6

Sometimes it is easier to use the “Load Optimized Defaults”, then change the BIOS settings (See X) . 1.1.2. “M7VIG PRO” Motherboard and “Phoenix –

Strany 7

CPU L2 Cache ECC Checking [Enabled] Quick Power On Self Test [Enabled] Boot Up Numlock Status [On] Gate A20 Option [Fast] Typematic Rate setting [

Strany 8

OnChip PCI Device [Press Enter] VIA-3058 AC97 Audio [Auto] VIA-3068 MC97 Modem [Disabled] X VIA-3043 Onchip LAN [Disabled] X Super IO Device [Pres

Strany 9

Show H/W Monitor in POST [Enabled] Chassis Open Warning [Disabled] Shutdown Temperature [Disabled] Frequency Control Auto Detect DIMM/PCI Clk [E

Strany 10

Advanced BIOS Features Boot Seq/Floppy Setup [press enter] First Boot Device [CDROM] XSecond Boot Device [HDD-0] XThird Boot device [Disabled] XBoot

Strany 11

Secondary Slave UDMA [Auto] IDE Prefetch Mode [Enabled] IDE HDD Block Mode [Enabled] Onboard Device [Press Enter] AC97 Audio [Auto] MAC Lan(nVID

Strany 12

Sometimes it is easier to use the “Load Optimized Defaults”, then change the BIOS settings (See column X for changes) . 1.1.4. “M7VIG 400” Motherboar

Komentáře k této Příručce

Žádné komentáře

ASROCK M810LMR Uživatelský manuál

Procházejte online nebo si stáhněte Uživatelský manuál pro Základní desky ASROCK M810LMR. NTR Bios Settings Uživatelská příručka

Shrnutí obsahu

Komentáře k této Příručce

Související produkty a manuály pro Základní desky ASROCK M810LMR